获取本机网卡MAC码
时 间:2010-07-20 09:39:24
作 者:不祥 ID:12193 城市:伊春
摘 要:获取本机网卡MAC码 的VB代码
正 文:
代码整理如下:
Option Explicit
Public Const NCBASTAT As Long = &H33
Public Const NCBNAMSZ As Long = 16
Public Const HEAP_ZERO_MEMORY As Long = &H8
Public Const HEAP_GENERATE_EXCEPTIONS As Long = &H4
Public Const NCBRESET As Long = &H32
Public Type NET_CONTROL_BLOCK 'NCB
ncb_command As Byte
ncb_retcode As Byte
ncb_lsn As Byte
ncb_num As Byte
ncb_buffer As Long
ncb_length As Integer
ncb_callname As String * NCBNAMSZ
ncb_name As String * NCBNAMSZ
ncb_rto As Byte
ncb_sto As Byte
ncb_post As Long
ncb_lana_num As Byte
ncb_cmd_cplt As Byte
ncb_reserve(9) As Byte ' Reserved, must be 0
ncb_event As Long
End Type
Public Type ADAPTER_STATUS
adapter_address(5) As Byte
rev_major As Byte
reserved0 As Byte
adapter_type As Byte
rev_minor As Byte
duration As Integer
frmr_recv As Integer
frmr_xmIT As Integer
iframe_recv_err As Integer
xmIT_aborts As Integer
xmIT_success As Long
recv_success As Long
iframe_xmIT_err As Integer
recv_buff_unavail As Integer
t1_timeouts As Integer
ti_timeouts As Integer
Reserved1 As Long
free_ncbs As Integer
max_cfg_ncbs As Integer
max_ncbs As Integer
xmIT_buf_unavail As Integer
max_dgram_size As Integer
pending_sess As Integer
max_cfg_sess As Integer
max_sess As Integer
max_sess_pkt_size As Integer
name_count As Integer
End Type
Public Type NAME_BUFFER
name As String * NCBNAMSZ
name_num As Integer
name_flags As Integer
End Type
Public Type ASTAT
adapt As ADAPTER_STATUS
NameBuff(30) As NAME_BUFFER
End Type
Public Declare Function Netbios Lib "netapi32.dll" _
(pncb As NET_CONTROL_BLOCK) As Byte
Public Declare Sub CopyMemory Lib "kernel32" Alias "RtlMoveMemory" _
(hpvDest As Any, ByVal _
hpvSource As Long, ByVal _
cbCopy As Long)
Public Declare Function GetProcessHeap Lib "kernel32" () As Long
Public Declare Function HeapAlloc Lib "kernel32" _
(ByVal hHeap As Long, ByVal dwFlags As Long, _
ByVal dwBytes As Long) As Long
Public Declare Function HeapFree Lib "kernel32" _
(ByVal hHeap As Long, _
ByVal dwFlags As Long, _
lpMem As Any) As Long
Public Function GetMACAddress() As String
'retrieve the MAC Address for the network controller
'installed, returning a formatted string
Dim tmp As String
Dim pASTAT As Long
Dim NCB As NET_CONTROL_BLOCK
Dim AST As ASTAT
'The IBM NetBIOS 3.0 specifications defines four basic
'NetBIOS environments under the NCBRESET command. Win32
'follows the OS/2 Dynamic Link Routine (DLR) environment.
'This means that the first NCB issued by an application
'must be a NCBRESET, wITh the exception of NCBENUM.
'The Windows NT implementation differs from the IBM
'NetBIOS 3.0 specifications in the NCB_CALLNAME field.
NCB.ncb_command = NCBRESET
Call Netbios(NCB)
'To get the Media
'Access Control (MAC) address for an
'ethernet adapter programmatically, use the Netbios()
'NCBASTAT command and provide a "*" as the name in the
'NCB.ncb_CallName field (in a 16-chr string).
NCB.ncb_callname = "* "
NCB.ncb_command = NCBASTAT
'For machines wITh multiple network adapters you need to
'enumerate the LANA numbers and perform the NCBASTAT
'command on each. Even when you have a single network
'adapter, IT is a good idea to enumerate valid LANA numbers
'first and perform the NCBASTAT on one of the valid LANA
'numbers. IT is considered bad programming to hardcode the
'LANA number to 0 (see the comments section below).
NCB.ncb_lana_num = 0
NCB.ncb_length = Len(AST)
pASTAT = HeapAlloc(GetProcessHeap(), HEAP_GENERATE_EXCEPTIONS _
or HEAP_ZERO_MEMORY, NCB.ncb_length)
If pASTAT = 0 Then
Debug.Print "memory allocation failed!"
Exit Function
End If
NCB.ncb_buffer = pASTAT
Call Netbios(NCB)
CopyMemory AST, NCB.ncb_buffer, Len(AST)
tmp = Format$(Hex(AST.adapt.adapter_address(0)), "00") & " " & _
Format$(Hex(AST.adapt.adapter_address(1)), "00") & " " & _
Format$(Hex(AST.adapt.adapter_address(2)), "00") & " " & _
Format$(Hex(AST.adapt.adapter_address(3)), "00") & " " & _
Format$(Hex(AST.adapt.adapter_address(4)), "00") & " " & _
Format$(Hex(AST.adapt.adapter_address(5)), "00")
HeapFree GetProcessHeap(), 0, pASTAT
GetMACAddress = tmp
End Function
'--end block--'
'调用方法---'
'Option Explicit
'
'Private Sub Command1_Click()
'
'Text1 = GetMACAddress()
'
'End Sub
''--end block--'
Access软件网QQ交流群 (群号:483923997) Access源码网店
常见问答:
技术分类:
源码示例
- 【源码QQ群号19834647...(12.17)
- Access两种方式实现即时更...(03.01)
- Access隐藏与显示lacc...(01.12)
- 【Access高效办公】将每个...(12.23)
- Access21点游戏源代码(12.13)
- 【Access窗体导出Exce...(11.15)
- 【Access开发】Acces...(11.14)
- 通过Access宏录入数据到选...(11.10)
- 用DLOOKUP函数将需求表中...(10.31)
- Access日期区间段查询数据...(10.25)
学习心得
最新文章
- Access快速开发平台--在WI...(03.08)
- 使用SQL语句删除xscj表中学号...(03.08)
- Access快速开发平台进销存教程...(03.07)
- Access快速开发平台--frm...(03.06)
- 【Access删除查询】删除数字最...(03.06)
- Access快速开发平台进销存教程...(03.05)
- Access快速开发平台进销存教程...(03.04)
- Access快速开发平台--IsL...(03.02)
- Access两种方式实现即时更新月...(03.01)
- Access开发的资金管理系统;基...(02.29)